Abrasives
Accessories
Adhesives & Lubricants
Air Compressors
Air Tools
Bearing Heaters
Cases and Storage
Clamps
Clothing and Work Gear
Corded Power Tools
Cordless Power Tools
Cutting & Drilling Tools
Fasteners
Generators
Hand Tools
Hoists
Dust Collection
Lasers & Measuring Devices
Lighting
Metalworking Machinery
Outdoor Equipment
Paint Spray Equipment
Router Bits
Safety
Vacuums & DustCollerctors
Loading... Please wait...
- Home
- Shop by Brand
- Jet
- Pumps
- Jet 290771 - (R400-115) 1/2 HP Submersible Pump
Product Details
- Ideal for dewatering constructions sites, mines, circulating fountain water, or for all around use in industrial plants and utilities
- Top discharge allows for superior cooling of motor and provides a slim line design
- Longer power cord standard 33' power cord
- 304 Stainless steel motor housing superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water
- Three seal motor protection - motor is protected by double mechanical seals. Lower seal made of silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber
- More motor protection winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on
- Tough pump construction hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components
- Motor Rating : 0.5 HP
- Max. Flow : 50 GPM
- Max. Head : 36'
- Pump Type : Top discharge, dewatering
- Discharge Size : 2" NPT-M
- Max. Submerged Depth : 65'
- Motor Casing : 304SS
- Pump : Cast iron volute
- Impeller : Multi-vane
- Fibreglass Reinforcement : Plastic
- Lip Seals and O-rings : Buna-N
- Rotor Shaft : 304SS
- External Hardware : 304SS
- Qty of Oil in Seal Chamber : 1.35 US oz
- Motor Speed : 3,450 RPM
- Motor Insulation : Class F
- Motor Service Factor : 1.1
- Voltage : 115 V, 1 ph-60 Hz
- Current : F.L.A. : 6 A
- Motor Protection : Thermal Breaker
- Power Cord : A.W.G. 16/3; 33', STOW
- Max. Liquid Temperature : 104° F
- Amperes : 0.25 A
